Aethercomm Model Number SSPA 0.020-6.000-35-RM is a high power, rack mounted, RF amplifier that operates from 20 MHz to 6000 MHz minimum and is packaged in a rugged and rack mounted enclosure. This rack mounted GaN high-power RF amplifier is in a 4u height, 19” rack. Typical output power is greater than 35 watts up to 4.0 GHz at P3dB. Greater than 4 GHz up to 6 GHz, the power falls off to approximately 20 watts. Nominal input power levels are -7.0 to +6.0 dBm. Input VSWR is 2.0:1 maximum. Standard features include output short and open circuit protection and over/under voltage protection. This RF transmit amplifier operates from a +28 Vdc. This GaN high-power RF amplifier operates in a laboratory environment. This unit is designed to with stand much harsher environments. Please check with the factory. Temperature control is done with two fans that integral with this rack that provide an active thermal management system. An SMA female connector is standard on the RF input connector. The output RF connector is Type N female. The DC input voltage is supplied on the back face of the rack mount amplifier unit. Typical test data appears on page two of this data sheet at room temperature. For further test data or operation and logic and pin out requirements, please contact the factory.
- Gallium Nitride Technology
- Operation across 20 to 6000 MHz Minimum
- Rugged Rack Mount
- 35 Watts Typical Output Power
- 28Vdc Operation
- 25 uSec Turn On/Off Gating Times