Products Systems In Stock
Aethercomm designs and manufactures high power RF and microwave systems for use in radars, electronic warfare, communication and other types of systems. The systems we make typically contain high power amplifiers, low noise amplifiers, filters, AC-DC or DC-DC power conversion, up and down conversion, digital control (microprocessor and FPGA) and thermal management systems. Read more...Our systems land aircraft, monitor air traffic on the ground and in the air, communicate with aircraft; they provide telemetry to fighter aircraft, UAV’s and the Space Shuttle. We have hundreds of systems in the field with outstanding operational MTBF numbers. In this section you will see a sampling of heritage work in this field. Please contact the factory with any questions or requirements you may have. Less
-
Add to RFQ QueueSSPA 0.35-0.50-100-RM
Operation from 350 MHz to 500 MHz min Can Be Modified for Operation from 20 to 1000 MHz 200 Watts Peak Output Power Typical 115 VAC Operation
Product Added -
Add to RFQ QueueSSPA 0.35-0.50-1000-RM
Operation from 350 MHz to 500 MHz min 1000 Watts Peak Output Power Typical 230 VAC, 3 Phase Operation Multiple BIT and Protection Features on Rack
Product Added -
SSPA 0.96-1.22-2000
960 MHz to 1220 MHz Operation 2000 Watts Typical Output Power 60 dB Typical Gain Forward and Reflected Power Sampling Output Isolator for Protection
This product is for capability demonstration only, Call for details:
760.208.6002 -
Add to RFQ QueueSSPA 1.03-1.09-1000-RM
High Power IFF Band Power Amplifier 1000 Watts min Peak Output Power 60 dB typ Saturated Gain Typical Pulse Width is 100uSec Typical Duty Cycles are 1% to 10%
Product Added -
Add to RFQ QueueSSPA 1.025-1.150-1000-RM
High Power Pulsed Amplifier Assembly 1000 Watts min Peak Output Power 60 dB typ gain Typical Operational Pulses are IFF Waveforms Max Duty Cycle is 10%
Product Added -
Add to RFQ QueueSSPA 1.2-1.4-500-RM
High power L band radar power amplifier 400 watts typ peak output power 54.0 dB typ small signal gain Typical pulse width is 100uSec Typical duty cycle is 10%
Product Added -
Add to RFQ QueueSSPA 1.2-1.4-800-RM
High Power L Band Radar Pulsed Amplifier 800 Watts typical Peak Output Power 50 dB typ gain Typical Pulse Width is 100uSec to 1000 uSec Typical Duty Cycle is 10%
Product Added -
Add to RFQ QueueSSPA 2.8-3.8-200-RM
200 Watts CW Output Power min Operation from 2.5 GHz to 4.0 GHz min Capable of Operation from 2.5 GHz to 6.0 GHz GaN Technology 208-220 VAC Operation
Product Added -
Add to RFQ QueueSSPA 3.1-3.5-1300-RM
Operation from 3100 MHz to 3500 MHz min 38 dB saturated gain typ 1300 watts peak output power minimum 208-220 VAC operation
Product Added -
Add to RFQ QueueKu Band Front End Assembly
Ku Band Front End Assembly 50 Watts Peak Output Power Low Noise Figure Receiver System Level Fault Isolation
Product Added
Call us for a direct quote
Send us an email at or call 760.208.6002
