Products Modules SSPA 5.10-5.25-50

Aethercomm Model Number SSPA 5.10-5.25-50 is a high power, RF booster amplifier system that operates from 5100 MHz to 5250 MHz minimum and is packaged in a rugged enclosure. This PA was designed with unmatched GaN devices and this allows us to tailor this amplifier for operation anywhere from UHF to X Band with similar power and gain characteristics. Please contact the factory with your specific frequency operating requirements. This PA module can be employed in any system that needs an increase in output power. This power amplifier is designed and manufactured for operation in harsh environments. Minimum output power is 50 watts across the band from a nominal exciter input power of 10 watts but any input power range can be amplified as this module offers a very large dynamic range. Input and output VSWR is 2.0:1 maximum. Typical system efficiency is 35-40% at the nominal drive level. Standard features include reverse polarity protection, output short and open circuit protection, and over/under voltage protection. Temperature and forward power are monitored and reported by this module. This RF transmit amplifier operates from a +24 Vdc power supply. This unit operates from -40C to +85C base plate temperature. Noise figure is 10.0 dB typically across the band. This high power RF amplifier is employed in high shock and vibration environments. This high power RF amplifier is employed in high shock and vibration environments. Standard housing size is approximately 4.00(w) by 6.00(l) by 1.85(h) inches. An SMA female connector is standard on the RF input. A Type TNC is standard on the RF output port. DC and logic connections are accessible via a DSUB connector.