Products Modules TR 0.2-2.0-50

Aethercomm Model Number TR 0.2-2.0-50 is a high power, decade band, transmit/receive (TR) module that operates from 200 MHz to 2000 MHz minimum and is packaged in an enclosure that is optimized for state of the art military radio applications. This extremely broadband power amplifier is employed in communication systems where high power, high efficiency and high linearity is required across the UHF and L Band spectrums. It transmits all the legacy waveforms and the newer WNW and SRW waveforms. All modes of WNW and SRW and legacy UHF waveforms are transmitted and received. The power added efficiency of this amplifier is typically 25-35 percent. Typical output power is 50 watts and is controllable in 0.5 dB increments or decrements depending on the band of operation and the waveform employed. Power gain is ~20 to 25 dB. Input VSWR is 2.0:1 maximum. The receive function in this module is passive and offers a typical loss of <1.50 dB. Tx/Rx and Rx/Tx switching times are extremely fast at 25 uSecs maximum. Standard features include reverse polarity protection, output short and open circuit protection, and over/under voltage protection. All functionality is controlled via an onboard FPGA. All BIT/FIT signals are controlled and routed through this assembly to the host exciter. Temperature is monitored and reported by this module along with many other health parameters. This RF amplifier operates from a MIL-STD-1275D DC power supply. There is an ALC function on this module that ensures excellent power flatness across the full band. This unit operates from -40ºC to +85ºC base plate temperature. The thermal management system is designed into the sides of this broadband, rugged and robust module.

This high power TR assembly is employed in high shock and vibration environments. It is designed and tested to withstand MIL-STD-810 vehicular requirements. Standard housing size is approximately 2.52(w) by 9.22(l) by 6.85(h) inches. There are two power amplifiers per assembly for simultaneity requirements. All RF Ports are TNC female. DC and logic connections are accessible via mil- circular connectors. There are programming ports and many other features that are not shown. Typical test data appears on page two of this data sheet at room temperature. For mounting and heat sink instructions, further test data or operation and logic and pin out requirements, please contact the factory.

Add to RFQ Queue
Product Added
  • Operation across 200 to 2000 MHz
  • PAE of 25-35% typical
  • GaN Technology
  • Compliant with all Military UHF/ L Band Waveforms
  • 50 Watts Output Power – Scalable for Waveform
  • <1.5 dB Insertion Loss in Rx Mode
Low Frequency200 MHz
High Frequency2000 MHz
Output Power50 watts typ
Short ProtectionYes
Over ProtectionYes
Baseplate Temp-40C to 85C

Download the PDF Product Data Sheet for TR 0.2-2.0-50.

Call us for a direct quote

Send us an email at or call 760.208.6002

Capabilities
Research & Development
High Volume Manufacturing
Environmental Testing
Products
Modules
Sub-Systems
Systems
Product Index
Company
About Us
Quality Standards
Leadership Team
Our Customers
Facility/Tour
Defense Heritage
News & Media
Events
Product Releases
Catalogs
Advertisements
Technical Articles
Community Involvment
Work With Us
Contact Us
Careers
Seaport-e
BSI Registered / 12 Years in Business